每日更新在线观看,在线视频日韩欧美国产,在线视频www

Hot water radiant panel heating heating fast, reduce high space heat loss

time：2023-12-05
hits：1159次
source：正弘奧能

At present, domestic enterprises use traditional heating methods, such as radiators, heaters, etc., but the heating efficiency is low, the energy consumption is large, the operation noise is large, the operation cost is high, and the comfort is low can not be ignored. The root cause of low heating efficiency and large energy consumption is determined by the nature of convective heating mode, that is, direct heating of air, caused by large temperature gradient. 
 

	Compared with the convection heating method, the radiation heating is adopted, no convection phenomenon, small thermal inertia, no long time preheating, and fast heating speed. In the environment of radiation heating, the enclosure structure, the ground and the surface of the equipment in the environment have a higher temperature, there is a dual effect of radiation intensity and temperature, resulting in a thermal state that truly meets the requirements of human heat dissipation, so the human body has the best sense of comfort, at this time the human sense of temperature is higher than the air temperature of the surrounding environment. At the same time, as the temperature of the indoor surface is increased, the cold radiation of the surrounding surface to the human body is reduced.


	 


	<img src="http://www.sylyby.cn/Uploads/image/20231205/20231205141621_30915.png" alt="" /> 

 
In the infrared radiation heating products, the hot water radiation panel uses hot water as the heat transfer medium, the radiation panel is arranged in a modular strip, and is installed above the heating space in the form of a ceiling, which effectively solves the problems of poor heating effect and high energy consumption in the convection mode in the tall space. Hot water flows in the radiation panel pipeline, heat transfer to the radiation panel, generate infrared rays, transfer heat to people and objects in tall space buildings, and reduce vertical gradient heat loss. In high-space industrial buildings, this means saving energy and economic costs. 
 

	Hot water radiant panel heating can be used for full heating of buildings with a height of 3m~30m and local area or local workplace heating, and can be used in volatile and flammable building environments, including large shipyards, ships, aircraft and automobile maintenance halls, building materials markets, shopping centers, exhibition venues, multi-functional stadiums and entertainment halls and many other occasions. Do not increase the fire rating of the building, will not cause the risk of fire and explosion.


	 


	<img src="http://www.sylyby.cn/Uploads/image/20231205/20231205141633_20368.png" alt="" /> 

 
ECOPAN Hot water radiant panel adopts an innovative design concept, the pipe as the warmest part of the panel, completely down, and by the metal plate wrapped 70% of its surface (wrapping Angle more than 280°), increasing the heat transfer area, excellent guarantee of heat transfer from the tube to the plate. With the same dimensional characteristics (pipe diameter, number and spacing, panel width), ECOPAN hot water radiant panels have higher thermal energy efficiency than other products on the market. This makes it possible to use fewer products to meet the same heating requirements, saving on materials and installation costs.

夜夜操狠狠干_国产免费观看久久黄av片_91校长国产在线观看_人禽杂交18禁网站免费_少妇一级淫片免费放正片_成人无码视频

Hot water radiant panel heating heating fast, reduce high space heat loss